Paul,
The smaller one is the clutch. Smaller system, less fluid needed.
Pete
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Paul Dorsey
Sent: Sunday, May 28, 2006 2:39 PM
To: triumph list
Subject: [TR] clutch/brake resevoir design
Inside the brake/clutch resevoir is a tall cylinder which enables you to
have
seperate fluid resevoirs. Does the fluid from inside the tall skinny inner
one go to the brake or clutch? I'm betting the brake...
Thanks, Paul
60 TR3A
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|