triumphs
[Top] [All Lists]

[TR] Re: Heat shield template10

To: Triumphs@autox.team.net
Subject: [TR] Re: Heat shield template10
From: don spence <dkspence@telus.net>
Date: Wed, 24 May 2006 16:23:09 -0600
Do you have all the shrouds installed, These are fibre board pieces  
that run down each side of the engine compartment and encase the rad  
directing airflow through, not around the radiator, Also Through the  
engine compartment.
On 23-May-06, at 8:51 PM, Triumphs@Autox.team.net daily digest wrote:

>
> Date: Tue, 23 May 2006 15:04:52 -0400 (EDT)
> From: Cameron Rooke <beaker211@rogers.com>
> Subject: [TR] Heat shield template
>
> Greetings,
>
> I was wondering if anyone has a template for a heat shield for a  
> GT6 ('71 with strombergs) or a website where I can download one.  
> Even one for a TR6 so I can get the basic shape to start with would  
> be appreciated. Popping the hood for 15 minutes at every short  
> break in driving is getting on my nerves. Any help much appreciated.
>
> Cameron
> '71 GT6


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>
  • [TR] Re: Heat shield template10, don spence <=