----- Original Message -----
From: <TR250Driver@aol.com>
To: <ZoboHerald@aol.com>; <triumphs@autox.team.net>
Sent: Wednesday, May 17, 2006 12:04 PM
Subject: Re: [TR] Pitted Tapppets
> In a message dated 5/16/2006 9:55:15 PM Eastern Standard Time, ZoboHerald
> writes:
>
>
> > I almost hesitate to ask this, but what do the camshaft lobes look like?
> >
> >
>
> I looked at #1 and as much as I can see down there it looks OK. I am going
to
> check them all out very carefully tonight.
> Thanks Guys,
Darrell:
Might as well (as long as you are there) order the sleeve kit with both sets
of crank bearings. Just a few more dollars will get the timing chain, gears
and idler. Oh and don't forget the oil pump.
Lou Metelko
Auburn, Indiana
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|