Jeremy,
I uploaded a few pictures of my fuel line. The key is the little holder and
rubber block that hold the fuel line and the vacuum line (pic3). You'll find
the pictures here:
http://www.geocities.com/britishiron2000/fuel.html
I hope they help,
Jim
'67 TR-4A
'68 GT6
'73 Spit6
http://www.geocities.com/britishiron2000
Jeremy Kinney <kinneyjr@msn.com> wrote:
I need to replace the entire fuel line network in my 4A engine bay. What is
there is clogged solid, not original, and pretty dangerous (rubber line
wrapped around the front of the valve cover). I would like to put it back
as original. Would any of the TR4A owners with original/restored cars have
photographs of their engine bays that I could consult? A website address or
reference to a particular book would also be helpful. I've got the Roger
Williams book, but Piggot is two states away at the moment.
Also, I thought there was a company that sold a fuel line kit that was
pre-bent, but I cannot find the link. Any ideas?
I have dual Strombergs (for now).
Thanks in advance,
Jeremy Kinney
'66 TR4A
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|