Here' a link to a good UK company that has all the overdrive parts for
Laycock overdrives -- as I understand it. I met them at the Stoneleigh
Autojumble a year ago and they were really helpful to questions, etc. You
might email them and see what they suggest.
http://www.overdrive-repairs.co.uk/index.html
hope this helps
Tom
61 TR3A
62 TR4
73 Stag
> Harry wrote:
>
>> Basically the same O/D but with a couple of minor
>> differences, one of the being the speedometer pinion and gear setup.
> Long
>> story short, I have to re calibrate the speedometer. Anybody have that
> done
>> before??? What is entailed??? Any suggestion would be greatly
> appreciated.
>
> I would think that you could replace the gear at the trans. That is, my
> guess is that you could order a replacement gear for the TR6 OD and put
> it on the OD you have. That might get you to a closer ratio to get the
> speedo right.
>
> Let us know what you end up doing to fix the issue!
>
> -Scotty
> '74 TR6
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|