List-
I have a late model TR4 which has the rear damper link attached to the axle
spacer, not the bottom spring plate as in the earlier models. I notice that
my links are badly worn (one is completely missing the rubber innards). The
TR4 factory manual I have does not describe removal of this item - it looks
pretty easy if it is attached to the bottom plate. But in my case, it
doesn't seem like it can be removed due to frame clearance unless the
u-bolts are removed and the spacer is moved.
Can anyone with a similar configuration confirm that there are clearance
issues, or is it still just a simple unbolt and refit? Responding offlist
is great.
Thanks,
Randy
65 TR4
64 TR4
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|