Bill,
I am going from memory here so I hope someone from the list whose
memory is better than my own can back me up or straighten me out. I
believe there were two different size PDWA's produced. I would guess
that once you get it apart and remove one of the O rings it will become
obvious which size is for the PDWA that you have. These O rings
shouldnt have stretched out to the point where they arent pretty close
to the size they originally were.
My two cents, feel free to ask for a refund.
Aaron
Aaron Cropley
71 TR6 (Throttle Body Injection!)
http://www.triumphowners.com/108
Topsham, Maine
-----Original Message-----
From: Steinman, Bill <wsteinman@pogolaw.com>
To: triumphs@autox.team.net
Sent: Fri, 14 Apr 2006 21:03:51 -0400
Subject: [TR] Quick PDWA Rebuild Question
Howdy all:
I've got a quick PDWA rebuild question. The rebuild kit contains two
sizes of
rubber o-rings for the shuttle. Anyone happen to know whether I use
the larger
size or the smaller size? Thanks as always!
B.
NOTICE: This communication may contain privileged or other confidential
information. If you are not the intended recipient, or believe that you
have
received this communication in error, please do not print, copy,
retransmit,
disseminate, or otherwise use the information. Also, please indicate to
the
sender that you have received this communication in error, and delete
the copy
you received.
IRS CIRCULAR 230 Disclosure: Under U.S. Treasury regulations, we are
required
to inform you that any tax advice contained in this e-mail or any
attachment
hereto is not intended to be used, and cannot be used, to avoid
penalties
imposed under the Internal Revenue Code.
Thank you.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|