Thank you, Harold. Is this stuff that will come apart fairly readily if I
need to take the tunnel off again?
> For general sealing I've been using DAP 240 ( might be 220 ) from the home
> center. It is a rubbery elastomer sealer. It goes on like latex but does
> not
> get hard. It is,'t as slipery as silicone.
>
> The stuff says not for auto use. I suspect it can't take a direct salt
> spray
> but it has workled just fime for me.
>
> Harold
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|