-------------- Original message --------------
From: Harrymague@aol.com
> I am attempting to install a Moss oil cooler with the thermostat. Does
> anybody have pictures of what the installation should look like. The oil
> cooler itself is no problem, it is the thermostat. The hoses barely are long
>enough to fit. May first thought was to attach the thermostat to the fender
>wall, but the lines are not long enough. Any help would be greatly
>appreciated.
I don't have the Moss kit, but when I fitted my TR6 with a cooler and oil stat,
I made a bracket for the stat and mounted it to the driver's side (US version)
radiator support that goes to the chassis cross tube. It's been there since the
late 80's.
HTH,
Irv Korey
74 TR6 CF22767U
Highland Park, IL
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|