> now I need to find a "push-starter switch"
> for the dash.
> Since this only has two wires, a white wire from the key-switch and
> red/white from the solenoid, then I wonder if I can temporarely use a 'door
> bell switch'?
Should work, at least temporarily. But the solenoid draws rather more current
than a run-of-the-mill doorbell, so don't be surprised if the contacts don't
last long. NAPA or an electronics store might have a "push to start" button
that would last longer and might even fit in the stock hole. I saw one in
Torrance Electronics the other day.
> I think I
> also misplaced the small black rubber 'bulb'-like cover that goes on the end
> of the solenoid.
You can buy just the bulb. Moss P/N 546-025. TRF has it too, but I don't have
the P/N handy.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|