<<Normally, yes.
Bill
Popnglo@aol.com wrote:
I emailed BPNW with the following questions, and thier reply was also as
follows. Am I missing something ...>>
BUT, they MUST be checked for "trueness", straightness and journal
"roundness"!!!!
I currently have a XPAG (MG "T" Series") motor at machine shop having
FOUR sleeves installed and rod STRAIGHTENED!!!!
Just had a Spridget 1275 motor done there and all four rods where
"crooked" BUT "restored" to correct.
There ARE some things best left to machine shop<G>!!!
Besides having short block done by them, it gives me a WARRENTEE for
said short block.
NEVER had to use tho <VBG>!!!
Dollar here, dollar there!!
Ed
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|