I remember seeing something somewhere about putting a piece of rope in the
spark pluh hole and using the engine to pop the head off. This engine is
not in a car so I cant use a starter, but I tried it using the fan to turn
the engine over and after one broken fan blade and one skinned knuckle, I
can now see a slight gap between the head and the block. The head still
doesn't want to come off though. I know I not supposed to lever it off, but
it sure seems tempting. Any ideas much appreciated. Thanks.
Jon
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|