It's ok to cut them off, but leave at least one thread "showing". So don't
cut them absolutely flush.
Tom
----- Original Message -----
From: "Paul Dorsey" <dorpaul@negia.net>
To: "triumph list" <triumphs@autox.team.net>
Sent: Monday, October 31, 2005 8:50 PM
Subject: shortening mounting bolts
> After using a body mounting kit and grade 8 nuts and bolts (procurred from
> a
> hdware store) is it ok to cut the excess bolt length off with an
> appropriate
> electric saw? I suppose cutting them close to their nyloc nuts in order
> to
> give the car maximum ground clearence?
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|