John A. Wise wrote:
> Any recommendations for plugs & wires for a 1960 TR3A that has a Crane
> electronic ignition and lives at 1500 ft MSL in the high desert that
> had 23 days over 110F this summer.
I use a generic copper wire ignition set from the FLAPS -- can make 3 or
4 TR sets from the contents of one box. Not so good for radio reception
but I think we've covered that topic.
Have had good luck with all the usual plug brands so can't point to one
as superior. I tend to clean my plugs once in awhile using a wire brush
and the Bosch Platinum don't like such harsh treatment as they have that
little wire electrode.
Okay - this is a stock ignition so maybe there is a plug brand that the
Crane will prefer.
Geo Hahn
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.14/131 - Release Date: 10/12/2005
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|