Dave Connitt wrote:
> ...I already put the head on the motor but I haven't torqued it down
> yet. I am
> wondering if there is a source for a head gasket with round openings
> for the
> cylinders and will work with the 87mm pistons and sleeves.
This is the (Payen) gasket I got from Moss (was copper but as shown has
been painted with aluminum paint to seal better). This is on the TR3
but it is a universal fit with large enough cutouts for 87mm pistons. I
take it yours does not look like this.
http://www.cybertrails.com/~ahwahnee/headoff3.JPG
Geo Hahn
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.14/131 - Release Date: 10/12/2005
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|