In a message dated 10/3/2005 12:35:31 PM Eastern Standard Time,
tr3driver@comcast.net writes:
> Just to belabor the obvious ... the other possibility is that there are
> problems with the wires/connectors, that didn't show up with the dash out.
> IMO corrosion, dust, etc. would not explain the turn signal coming on
> without the TS switch ... that had to be a short of some sort.
>
Randall may be right, I fooled with my 250 Hazard Switch in much the same way
but I don't recall if the turn signals were ever involved. I remember the
dang thing would do a lot of clicking when first pushed on but nothing would
flash. Give it a wiggle side to side and flashing would occur.
Darrell
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|