At 9:13 AM -0400 9/23/05, N197TR4@cs.com wrote:
>List:
>
>A number of TR250/TR6 folks are interested in this subject.
>
>Before I put a heat shield on my TR4 vintage racer, the domes on the carbs
>we VERY hot to the touch. When I hand fabricated the heat shield and installed
>it, the domes actually became cool to the touch.
>
>We have been working together on a couple of Heat Shield designs for the
>Street TR6. I have three basic variations in mind. Of course the one
>that is most
>effective, is the most difficult to manufacture. If you are interested in the
>progress of this project and/or would like to provide some input, I can put
>you on a list of prior inquiries.
I cannot say if Joe's "ARE" heat shield for my TR3A will have any
impact --as my carburetors are still laying on my workbench, but I
tell you they are very high quality and look good!
FFI
John
--
John A. Wise, Ph.D., CPE
Glendale, AZ
JohnWise@alumni.pitt.edu
1960 TR3A TS80422L
http://home.earthlink.net/~johnwise/TR3A.html
|