I think the flywheel would obstruct the view.
JVV
----- Original Message -----
From: "Kurtis" <tr4driver@gmail.com>
To: "Geo Hahn" <ahwahnee@cybertrails.com>; "TR" <triumphs@autox.team.net>
Sent: Thursday, September 15, 2005 9:12 PM
Subject: Re: Clutch Update
> Geo,
>
> I'm wondering if one couldn't remove the lower dust cover on the bell
> housing and view the clutch fork pin (perhaps with a mirror).
>
> Kurtis Jones
> Russellville, Arkansas
> 1963 TR4 - CT19389L
> 1959 AH Bugeye - AN5L23250
> www.geocities.com/tr4_1963
>
> ----- Original Message -----
> From: "Geo Hahn" >
> >
> > Is there a definitive way to diagnose a broken clutch fork pin other
than
> > direct inspection? Seems that the various symptoms that suggest this
> > problem also have other possible causes.
|