I bought the wheel alignment tool that MOSS sells for about $40. It is
acutally designed for a car with more ground clearance than my TR3. Anyway, it
was no big deal and I set the wheel aligment to 0 toe in and the car drives
fine. It is easy and convenient to recheck as well. The tool only works for
toe in/out and not anything like camber or castor.
Then again, for the hearty or hardy there is the "pin" method.
-Bill Brewer
Tehachapi, CA
------------------------------
Date: Wed, 7 Sep 2005 20:34:08 EDT
From: ABosonetto@aol.com
Subject: Front end alignment
I have just rebuild the front end on my TR4
Has anyone done their own front end alignment. If so how did you do it.
Thanks
Al
63 TR4
|