Dave1massey@cs.com wrote:
> In a message dated 7/8/2005 6:01:02 AM Central Standard Time,
> dmallin@attglobal.net writes:
>
>>Here are the seats
>>http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=32958
>>Looks like the TR250 is it's own thing -- unlike the TR4 or the TR6.
>>
>>Seems to me the outer padding surround on the seat back is not symmetrical.
>>There is a left and
>>right to it. But I'll be home tomorrow, and can look at them. But even if it
>>is, maybe it's just the
>>TR250 and not the TR6. The seat covers on my 71 TR6 (same as 72) are old and
>>the PO has "repaired"
>>them with some new panels, so I can't tell anything from them.
>>
>
> OK, so they are. But from the picture I can't tell why there would be a
> Right and Left pattern.
>
> Dave
>
FWIW, the backs of the TR250 covers are marked left and right. It looks like
the padded outer
surround is not symmetrical: one side of the back padding surround is wider
than the other side (of
the same seat). The seat bottoms are not marked L/R. They appear to be
identical.
Don Malling
|