Hi Adrian,
Let me be clear on this - I do NOT recommend running an MGB distributor on
your TR4/4A motor UNLESS the mechanical advance weight 'springs' are re-placed
with TR4A spec'd springs, and the 'vacuum advance' is changed to the proper
2-6-3 model.
Then you'll have the factory spec'd TR4A curve - not an MGB curve, which is
very different.
Regards,
Carl
'63 TR4 since '74
- - - - -
<< I agree with Carl on this one.
My TR4A ran fine with a MGB distributor fitted. This is how it was when I
bought the car. The advance curves may be different etc. but it does not seem
any
different to the correct one I now have fitted.
Adrian
TR4A CT64306 O >>
|