The trick here is to s-t-r-e-t-c-h the glazing strip which obviously
makes it thinner , push the frame onto the glass and the rubber
retracts to form a tight seal.
Easier said than done , but it's possible , especially with 6 hands!!
Cheers
Mike
http://mikek.9online.fr/index.htm
> > I purchased the requisite glazing strip from TRF, a roll of sticky
> > black ribbon about 1 1/2" wide.
>
> I've heard before that the glazing sold by most LBC vendors is too
> thick for easy assembly. When I did my TR3A many years ago, I took
> the pieces to a local auto glass place and asked for help. They sold
> me a black glazing strip that was much thinner, even thinner than
> friction tape (which it resembled) and things went much easier after
> that.
|