In a message dated 5/24/2005 2:01:14 PM Central Standard Time,
70TR6@mindspring.com writes:
> http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=1107&;
> prmenbr=3
> 61
>
> #2 - I don't want to use the probe provided with some kits. I want to
> put a temp sensor either in the radiator or in a hose somewhere.
>
If you have your radiator out at the shop have them put a bung in for you.
Failing that you can rig up a fitting for the manifold heat hose with a 3/8 NPT
fitting that will work fine except you may have to run a ground wire for the
sensor to work properly. Sunbeam Tigers had such an arrangement for the temp
gauge.
Cheers
Dave
|