| To: | "TR" <triumphs@autox.team.net> |
|---|---|
| Subject: | RE: TR3/TR4 Head Core Plug |
| From: | "Randall" <tr3driver@comcast.net> |
| Date: | Wed, 18 May 2005 11:15:51 -0700 |
> Seems to me that I put a little permatex around the > perimeter, too, but it has been so long since I have done this > that I have > forgotten. Maybe someone else on the list will have an opinion on this... I always use a generous portion of Permatex Aviation Form-a-Gasket on core plugs (aka freeze plugs). Except if the sealing surface in the block is damaged, I have been known to use JB Weld rather than Permatex ... Randall |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: TR6 engine rebuild needed, Jim Barbuscia |
|---|---|
| Next by Date: | RE: SU conversion tr6, Randall |
| Previous by Thread: | Re: TR3/TR4 Head Core Plug, Michael Marr |
| Next by Thread: | liners and pistons tr3, Randy Homanchuk |
| Indexes: | [Date] [Thread] [Top] [All Lists] |