Randall wrote:
>If you can remove the tube from the adaptor, and then unscrew the adaptor
>from the WP housing, the threads are a standard pipe thread and a pipe plug
>from the hardware store will work. Sorry, don't recall offhand if they're
>3/8" NPT or 1/2" NPT, but you can just take the adaptor with you to the
>store & buy a similar looking plug.
>
That's how Triumph did it when the car was sold w/o a heater. I think
it is the same as the drain plugs on the engine, diff and gearbox --
1/2"? At the other end you can shut off the tap or replace it with a
similar plug.
Geo Hahn
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.8 - Release Date: 5/10/2005
|