Jim --
I just went through this on my TR4.
I fabricated brackets out of aluminum flat and angle stock. Short (~2")
pieces of angle stock are riveted at either end of a ~10" flat piece. The
angle brackets are located and drilled to bolt to the back of a bumper bolt
and the over-rider mounting bolt such that the flat stock bridges the bottom
edges of the bumper mounting bars. This provides a horizontal surface just
behind the lower edge of the bumper. I've got the lamp attached to this
surface. Tough to describe, but I'd be happy to provide an emailed picture
if you're interested.
Dean Mericas
1965 TR4
1974 2000 GTV
> -----Original Message-----
> Date: Tue, 29 Mar 2005 12:56:46 -0700
> From: "Jim Bauder" <jimbpps@cox.net>
> Subject: Driving lights
>
> I would like to mount a pair of driving lights under the
> bumper of my TR250.
>
> Has anyone on the list seen and/or done an under the bumper
> driving light
> mount for the TR4/4A/250 and could share their methods??
>
> TIA,
>
> Jim Bauder
> '58 TR3 (Sold and now just a memory!)
> '68 TR250 (Almost ready for paint!)
> Scottsdale, AZ
|