Mark et al,
Thanks for your plug wire checks. Prievously, I always got that stuff mixed
up, now it's in black and white. And written for laymen too.
Are there other common sense tests which I can do before reinstalling my old
wiring harness back into my restoration TR3A? The PO said it was good!
Thanks, Paul Dorsey
60 TR3A
From: "Mark Endicott" <mini@nashvilletn.org>
Subject: Re: Plug wire and Spark Plug ???'s
>Jim,
>
>Although I'll bet it's not your problem resistor or >solid core wires should
>work fine. Having recently found myself dead >on the road I have a couple
of
>places to start.
>Buy or make a test light, two wires and a 12 volt >bulb can tell you most
all
>you need to check the ignition.
>1. Check the + side of the coil with the ignition >switch on, you should
>have 12 volts.
|