1960 TR3
Greetings all,
55 days to go till my 50th and I am making progress on this car daily. In
cleaning the undercarriage of 45 years of grease and oil, I decided to remved
the arking brake cable. Following the manual, I disconnected the clevis pins,
and released the cable from the two clamps. The problems comes in trying to
get the cable off the car. It seems it goes through the frame, with a hole
too
small to allow the fork to go through. Trying to remove the fork from the
cable is worse than dealing with the caged nuts. It isn't giving at all.
Any BTDT thank you, once again.
Terry
Hampton Bays NY
Power washing the bottom in 50 degree weather before the Canadians hit us
again with a cold front.
|