> I'm looking for the piece that connects the dash to the dash support,
> holds a radio or extra switches. I've seen them
> on Ebay in the past but was fortunate enough (or wealthy enough) to get
> one. Any help?
Russ,
Here a link to a plan I drew up to have one fabricated for my TR4 (based on
the measurements I took off of my car an pictures I'd seen of the piece on
other cars).
http://members.cox.net/1963tr4/Miscellaneous/TR4_Radio_Bracket.pdf
It's probably not exactly correct, but it worked fine for me. I just took
this plan to a local machine shop and had them make it. I think it cost me
about $30.00. BTW, I ended up having mine made without the taper (a uniform
width of 8"). Otherwise, the lower corners of the radio I had would have
stuck out. I'd be happy to send you a picture of mine installed in the car
if you're interested.
Kurtis Jones
Russellville, Arkansas
1963 TR4 - CT19389L
1959 AH Bugeye - AN5L23250
www.geocities.com/tr4_1963
|