----- Original Message -----
From: <ElangTR4@aol.com>
To: <Triumphs@Autox.Team.Net>
Sent: Tuesday, November 02, 2004 8:39 AM
Subject: TR6 alignment
> Listers,
> I need to have a wheel alignment done on my 71 TR6 after replacing the
> steering rack. My local alignment guy said he would do it, but he would
> need the specifications as they are not in his computer or any of his
> books. Too old I guess. The car, not the alignment man. Can anyone tell me
> where to find these specs?
> Thanks,
> Eric Langreder
> 71 TR6
Eric-
The Bentley manual will have all the specs needed. This is what is
listed under "General Specifications Data" for USA market page 45:
Wheel Alignment: Front 0 to 1/16" toe in
Rear 0 to 1/16" toe in
Camber: Front 1/4 degree negative +/- 1/2 degree
Rear 1 degree negative +/- 1/2
degree
Caster: 2 3/4 degrees +/-1/2 degree
King Pin inclination: 9 1/4 degrees +/- 3/4 degree
If you don't have a Bentley manual, you should put it on your Christmas
list!!!!
Tim Hutchisen
71 TR6
71 Spridget
|