HelloListers:
Wondering if anyone has a good set of 83mm. liners available? Had a bit of
a setback in my re-build (second one) and could use a good set of 83mm.
liners. They should be within std. specs. and can be used with std. size
83mm pistons.
I have a new set of std. pistons and rings, but my liners are .0065 over.
Would like to use the pistons, etc. so asking if anyone has a good set they
would part with.
Please contact me off list at:
a3graham@uwaterloo.ca
Thanks,
Angelo Graham
'55 TR2
(located in Ontario, Canada)
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|