HI Rob,
Since your TR6 is a CF model, the front lights are driving lights - always
on. The Home Market series, CP and CR used these lights as repeaters.
Regarding the lenses, I think you want the ones with the reflector. The
repeater lens is clear by comparison -has no hash marks.
Dave
CP51649
Ramona, Ca
Hi everyone,
Well, as I (hopefully) enter the last few weeks of my 4 year restoration,
I've encountered a couple of memory lapses.
First, the front lights located on the fenders. They have one green/white
and one black wire on them. Are they supposed to blink as turning
indicators or are they simply driving lights (ie always on)? The
green/white suggests they should blink but I can't remember from when my car
was running.
I also have two different lenses for the two sides. One has about 2/3 of it
as a silver foil backed reflector, the bulb lights only the lower 1/3. The
other is all clear, no reflector. Which is correct?
Second, speedo cable routing. After the cable goes through the fire wall, I
have it routed through the hole right above the PDWA on the inclined webbing
piece. Where does it go from there to get the angle drive on the trans? If
I just run it under the trans, it hangs very low and will probably snag on
something. It is not long enough to route over the trans.
Rob (from Ottawa)
74.5 TR6 CF28217UO
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|