I believe the brackets go inside the rear fenders and provide a kind of
"clamping/leverage" to hold the fender to the body shell near the rear tail
lights.
The chrome headed bolts sound like license plate bolts!
Good luck!
Jim Bauder
'58 TR3
(New!) '68 TR250
Scottsdale, AZ
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Shrack04@aol.com
Sent: Sunday, August 01, 2004 3:12 PM
To: triumphs@autox.team.net
Subject: TR3 Where do these parts go?
I have a couple of items left over and don't know where they go.
The first is a pair of brackets, that are 1" wide, 2-1/2" long with 3 bends
and a 3/8" or 1/2" hole in one end. Seems like they may have bolted down
with
the gas tank hold down straps but I'm not sure.
The second is a pair of small special bolts. They have chrome acorn type
heads, are approx. 1" long, have pointed tips, are fine thread, have Ny-loc
nuts
and the shaft of the bolt is smaller than the threaded area..
As always, Your help is appreciated! Thanks in advance, Kent Shrack
TR3a, TS78,563 O
|