RE: Driveshaft U-Joints

["Randall" <tr3driver@comcast.net>]

> Whenever that happens to me (which is far too frequently for my
> preference)
> It is impolssible to push the caps in far enough to engage the
> circlip.  If
> the circlip is in place I think the rollers are in proper location.  Some
> fresh U-joints are quite stiff but that is better than loose.

Nothing is impossible if you apply enough force ... remember he has a press
and he's not afraid to use it !

BTDT ... broke the bearing cap but didn't notice until the circlip was in
place.
Randall