I was thinking the same thing, but I am concerned that the little spike that
sticks into the wires will do more damage when I remove the wires from one
can and install them on another cap! Right now I am driving on the new
non-embossed cap and the black resistor wires. The lucas cap and the
bumblebee wires are the "spare".
-Tony
_____ORIGINAL MESSAGE_______
>Date: Sat, 03 Jul 2004 14:01:10 -0700
>From: Geo Hahn <ahwahnee@cybertrails.com>
>Subject: Re: Ignition wire originality question
>
>Athony Rhodes wrote:
>
>Would I get a deduction for the plain cap rather than the embossed cap?
>
>Would it be better to show the LUCAS cap with the bumblebee wires or the
>plain cap with black wires?
>
>If it was me and the points were important, I would install the black
>wires on the "LUCAS" cap. The switch over will take only a couple of
>minutes and once set up switching cap & wires would take only seconds
>(if you prefer to drive with the Bumble Bee wires). I would assume you
>would have the other cap & wires on hand as spare anyway.
>
>Geo Hahn
>59 TR3A
>64 TR4
>Mt Lemmon, AZ
|