> The unit is installed on my new purchase. I would like to check
> the previous owners work. The radial location of the pick-up in
> particular. Does anyone have this information?
Download the installation instructions from Crane's website :
http://www.cranecams.com/pdf/90002000a.pdf
Basically, the shutter should be centered in the slot, and as deep as
practical without anything rubbing.
FWIW, I had trouble with the rotor hitting the pickup, had to change rotors
to get it to work. Took me an embarrassingly long time to figure out that
was the problem, too.
Randall
|