I found the same thing, works much nicer than the old type.. John
Mitchell 76TR6
TBe749@aol.com wrote:
>Just thought I would share a recent experience with said subject matter. We've
>had our 250 for three years now. It had always required two people to open the
>bonnet. One person pulling the under dash release and the other person pushing
>the bonnet down close to the catch. I had tried adjusting the bonnet and male
>and female parts of the catch device. Not good.
>
>Several months ago (or years), I ordered two new cables (inside and out). One
>from TRF and one from one of the other Big Three. I put on the "others" first.
>Well, it didn't work either. Same old scenario. Last night, I finally took off
>the installed new one and put on TRF's. Walla, it pops right up now without
>any outside assistance. The outside sleeve was evidently collapsing and not
>pulling the catch lever. Needless to say I'm saving it to throw in Darrell's
>woods someday.
>
>I know this topic is not new. But for those of us still living in the dark
>ages and using there original release cables...buy your replacements from TRF.
>They are different and actually work.
>
>Tom Beaver
>TR250, CD 7876LO
>GT6, KF 20461U
>Sports 6 HB 4891LCV
>Sports 6 HB 3028LCV
>10 Estate TBE 37153LCV
>1200 Herald GB 22106LCV
|