triumphs
[Top] [All Lists]

Re: Temperature Gauge Question i6BJ8Wt2021220

To: "Kurtis" <kurtisj@cox-internet.com>, triumphs@autox.team.net
Subject: Re: Temperature Gauge Question i6BJ8Wt2021220
Date: Sun, 11 Jul 2004 12:07:57 -0700
References: <v0421010fbd14a428edd2@[129.239.169.67]> <001601c4660d$22102d30$6401a8c0@DD400821> <v04210100bd14f6ade694@[129.239.169.67]> <000d01c46620$9c777e80$6401a8c0@DD400821> <v04210101bd150c51fc51@[10.10.10.101]> <007701c46635$f73f09e0$6401a8c0@DD400821>
I had my 60 TR3A out for a short run around the neighborhood this 
morning and when I got it up to temp I brought it back to the garage 
and measured the temp using a small pocket thermometer inserted in 
the refill neck, which is about 5 inches behind the radiator and 
about 10 inches from the water temp pickup, but I would guess it to 
be slightly cooler.

I have a metric gauge scaled at 30C, 85C,       98C (no number, just a 
tic), & 110C. The temperature pick up looks new (i.e., very clean & 
shinny)

I did a check on my pocket thermometer, it read 32F in icy water and 
202F in a cup of water that had just stopped boiling.

At      90C on the gauge on the dash, I measured 152F in the filler neck 
, est. 160F

At  85C on the gauge on the dash, I measured 141F in the filler neck 
, est. 148F

John





John A. Wise, Ph.D., CPE
Dept of Distance Education
Embry-Riddle University

5483 West Potter Drive
Glendale, AZ 85308-9334

Tel-hm: (+1) (623) 376-9632
E-mail: Wise@erau.edu

http://home.earthlink.net/~johnwise





<Prev in Thread] Current Thread [Next in Thread>