To: | triumphs@autox.team.net |
---|---|
Subject: | Oil Ways -flushing 6.25.0.62; VDF: 6.25.0.107; host: imx2.tcd.ie) |
From: | John Gillis <jgillis@gemini.tcd.ie> |
Date: | Wed, 23 Jun 2004 10:43:15 +0100 |
Before I start re assembly of the TR2 engine, I want to flush out the oil ways in the block and crank. (my machine shop decided I might like to do this instead of them!). Any advise on this would be welcome. i.e do I remove all the bolts on the block gallery, is there any danger removing the allen screws from the crank, what is the best solvent etc.., Thanks John -- John Gillis Senior Conservator Library Conservation Trinity College. College Street. Dublin 2. IRELAND. Phones: 6081149 or 6081137 mobile: 086 1556589 |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Oil Ways -flushing 6.25.0.62; VDF: 6.25.0.107; host: imx2.tcd.ie), Unknown |
---|---|
Next by Date: | Re: In case you were wondering ..., Unknown |
Previous by Thread: | Oil Ways -flushing 6.25.0.62; VDF: 6.25.0.107; host: imx2.tcd.ie), Unknown |
Next by Thread: | Our upcoming London visit - (no LBC unless we see some!), Unknown |
Indexes: | [Date] [Thread] [Top] [All Lists] |