> Looking to fish around a bit and find out how folks here have cleaned
> their various parts
> of dirt, greasy and grime. What sort of solutions and techniques have
> been used with
> success?
>
Guy,
I've done a TON of parts cleaning over the past 14 months during my
off-frame restoration of a '59 TR3A. I spent $25 for a gallon of Marine
Clean from the POR-15 folks, then spent $8.00 for a gallon of Simple Green
at Home Depot. Findings? Simple Green worked as well at 1/3rd the cost and
was readily available. Get two plastic pans, one for a 40% solution of
Simple Green, the other for fresh rinse water. Let things soak and you
won't have to scrub, unless you're in a hurry.
Terry Smith
'59 TR3A (Body off, but the rest back on!)
New Hampshire
|