George, Thanks for the resposne. This is an aluminum (I'd guess) ring that is
beneath the instrument glass. The ring you are thinking of I think is goes
behind the instrument and the dash panel.Steve PecaAnnandale, New Jersey1958
TR3A - TS23867L--- On Wed 05/26, Geo Hahn < ahwahnee@cybertrails.com >
wrote:From: Geo Hahn [mailto: ahwahnee@cybertrails.com]To:
sppchicago@excite.comDate: Wed, 26 May 2004 16:42:39 -0700Subject: Re: Inner
Black Ring on Speedo/Tach InstrumentsStephen Peca wrote:> I recently swapped
out the housing of my non-functioning TR3 speedometer with a functioning TR4
speedometer housing. I also did the same for my tachometer. It was a
surprisingly simple effort. Question: I noticed when disassembling the TR4
housing (after removing the chrome ring and the glass), there was a black
colored inner ring held in place by two small strips of rubber...>If it is
the ring I'm thinking of, I just made a couple from black gasket material (the
stuff that is like thin carboard/very heavy paper).Geo Hahn
_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
|