Bob,
Here's how mine are connected:
Temperature guage - green/black (left) / green/blue (right)
Ammeter - brown/white (right) / brown (left)
Note: My car has been changed to negative ground. Reverse if your car is
positive ground.
All directions are from the prespective of sitting in the car and looking at
the guages in the dash face on.
I don't know about the temperature guage, but if you hook the ammeter up
backwards, it will simply reverse in operation (show a + current when you
actually have a discharge condition).
I hope this helps.
Kurtis J.
Russellville, Arkansas
1963 TR4
CT19389L
www.geocities.com/tr4_1963
> Hi,
>
> Installing tr4 temp and amp guages. Where do the wires go??
>
> From the "rear" of the gauges...
>
> Amp: which wire goes on the left, Brown with white or Brown.
>
> Temp: which wire goes on the left. Green/Black or Green/Blue.
>
> There are no markings on the gauges to indicate how to hook up.
>
> Looking at the wiring diagram we have...
>
>
> Amp: Brown/white on the left, Brown on the right
>
> Temp: Green/Black on the left, Green/Blue on the right
>
> Thanks,
>
> Bob Labuz.
|