triumphs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: Timeing a TR6

from [Randall Young] [Permanent Link][Original]
To: "Jim Barbuscia" <jimbar@centurytel.net>, "Big Triumph List" <triumphs@autox.team.net>
Subject: RE: Timeing a TR6
From: "Randall Young" <Ryoung@navcomtech.com>
Date: Thu, 1 Apr 2004 21:28:24 -0800 
> The bently manual I have says 4* ATDC at 800rpm no vacume . is
> this correct?

Nope.  Should be 4 ATDC with the vacuum retard connected and operating.

To check that the retard is working properly ... disconnect the line and the
idle rpm should increase dramatically.  The timing should move to about 12
BTDC (but no need to check that if the idle rpm jumps).

Randall
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Timeing a TR6, Jim Barbuscia
Next by Date:  Re: Vinyl (and other) cleaning, AVALON2455
Previous by Thread:  Timeing a TR6, Jim Barbuscia
Next by Thread:  Re: Timeing a TR6, Jim Barbuscia
Indexes:  [Date] [Thread] [Top] [All Lists]