| To: | TR <triumphs@autox.team.net> |
|---|---|
| Subject: | Re: Wheel Cylinders - Rebuild or Replace? |
| From: | Geo Hahn <ahwahnee@cybertrails.com> |
| Date: | Wed, 04 Feb 2004 10:04:15 -0700 |
| References: | <11d.2ac7a869.2d526c64@aol.com> |
| User-agent: | Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.4) Gecko/20030624 Netscape/7.1 (ax) |
MotoPsyche@aol.com wrote: >Just how likely is it that rear wheel cylinders for 9-inch brakes on >post-60000 TR3As can be successfully re-sealed so that they won't leak? > I've never had a problem with leaking, etc after replacing the seals. My experience has been with cars that have been in constant use (one replaced cause it leaked, one replaced cause it locked up)... if your car has sat a long time I suppose cylinder condition may be an issue. Geo Hahn 59 TR3A 64 TR4 Mt Lemmon, AZ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: TR3A bleeding procedures i14H5J8A009872, reveye |
|---|---|
| Next by Date: | Lightening flywheels; Was gbx shaft engagement, Jeffrey J. Barteet |
| Previous by Thread: | Wheel Cylinders - Rebuild or Replace?, MotoPsyche |
| Next by Thread: | Wheel Cylinders - Rebuild or Replace?, Dave Massey |
| Indexes: | [Date] [Thread] [Top] [All Lists] |