The brake line goes sequentially from the right front to the left front to
the left rear and then finally to the right rear...check it out, it is
furthest from the master cylinder.
-----Original Message-----
From: reveye@speakeasy.net [mailto:reveye@speakeasy.net]
Sent: Wednesday, February 04, 2004 10:32 AM
To: JMcmahon@ICTGROUP.COM; reveye@speakeasy.net;
105671.471@compuserve.com
Cc: triumphs@autox.team.net
Subject: Re: TR3A bleeding procedures
Is that due to that there is more brake line running to the drivers side
rear than the right rear??
Jim
> -----Original Message-----
> From: JMcmahon@ICTGROUP.COM [mailto:JMcmahon@ICTGROUP.COM]
> Sent: Wednesday, February 4, 2004 03:30 PM
> To: reveye@speakeasy.net, 105671.471@compuserve.com
> Cc: triumphs@autox.team.net
> Subject: RE: TR3A bleeding procedures
>
> I made a pretty dumb mistake the first time I bled my TR3 -- when I was a
> motorhead kid, whenever I bled brakes it was always the right rear first
> because it furthest from the master cylinder...on TR3's the drivers side,
> left rear, is furthest from the master cylinder and must be bled first.
|