Hi Al
In case you haven't already found the answer:
If you look closely, you'll see that one of the arms has an "L" stamped on
one surface and an "R" stamped on the other. The same part is used on both
sides of the car. The "L" faces up when it's mounted on the left side of the
car, and the "R" faces up when it's mounted on the right side.
- Nick
nwolf@u.washington.edu
>Date: Wed, 28 Jan 2004 21:03:22 EST
>From: ABosonetto@aol.com
>Subject: TR4 upper control arms
>
>I am rebuilding the front susupension on my 63 late TR4 I am at the point of
>installing the drivers side and noticed that the upper arms are different. Is
>the one with the most offset the front one.
>Thanks
>Al
>63 TR4
|