John-
Best replacement I've found is 3M heat shrink tubing. I recommend theirs
first, and Active Electronics used to carry it in their stores in 3' lengths
for about $2 before they went to online sales only... However, often it can
be found in True Value hardware stores electrical isles, for about $3.00 for
several 6" pre cut pieces. Radio Shack also carries an assortment of pre-cut
heat shrink tubing, which has a more plastic look to it than the 3M stuff,
which is a little more rubber like- either will work fine. Just get it large
enough to slip on, and then heat it to fit like a glove.
Scott
----- Original Message -----
From: <JRossi727@aol.com>
To: <triumphs@autox.team.net>
Sent: Monday, January 19, 2004 11:25 AM
Subject: Part needed
> Hello All. Is there a suppler for the plastic sleeves that go over the
body
> wiring clips? Thanks John
|