Lee:
Please go to the following link to see an article I wrote for our club
(CPTC) newsletter. It is the one "Replacing Valve Guides". This is the
method I used and found to be very effective. This was for my TR3A when I
rebuilt the head.
http://www.cptc.org/tech_tips.htm
As always, this is not intended to be a "professional" advice on proper
repair and servicing of Triumphs, but just "what worked for me".
Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3
-----Original Message-----
From: owner-triumphs@autox.team.net [mailto:owner-triumphs@autox.team.net]On
Behalf Of Janssen, Lee K
Sent: Monday, December 15, 2003 6:21 PM
To: - triumph (E-mail)
Subject: recommended tool for valve guide removal / insertion
I'm looking to replace some TR6 valve guides and I was wondering what tool
is best recommeded for the job.
Thanks in advance to all responding, and yes this is actually intended to be
used for the recommended application.
Later
Lee
|