To: | "Phil Ethier" <pethier@isd.net>, "Steve Smith" <dogzbody1@yahoo.com>, <triumphs@autox.team.net> |
---|---|
Subject: | Re: TR6 Hood (bonnet) fitting TRicks? |
From: | "Kai M. Radicke" <kai@radiohead.net> |
Date: | Tue, 2 Dec 2003 12:11:15 -0500 |
References: | <20031201041853.45679.qmail@web10410.mail.yahoo.com> <00d001c3b892$396a9c50$9865fea9@yourozqwz45srp> |
Phil Either, > > Attempting to refit the hood on my TR6 and it wants to > > go crooked. What's the TRick for getting it straight? > > We had a really small guy in our bubba ring who would squish > himself inside engine compartments to tighten hood bolts. Well if you cannot kidnap one of Santa's midget helpers, I have had success with aligning TR6 bonnets by reaching through the grill opening and adjusting both sets of bolts on each hood hinge. Of course you'll need to remove the grille if you have one fitted, and also remove the radiator shroud, and this should get you enough working room to get to the bolts on the hinges. Kai |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | RE: TR3A Master cylinder overhaul, McEwen, Art |
---|---|
Next by Date: | sway bar bushings, oliver |
Previous by Thread: | Re: TR6 Hood (bonnet) fitting TRicks?, Phil Ethier |
Next by Thread: | Re: TR6 Hood (bonnet) fitting TRicks?, Jack W. Drews |
Indexes: | [Date] [Thread] [Top] [All Lists] |