Steve is right. I have a fiberglass transmission cover.
I added the same material I believe. I got it from the
lumber yard. It is the blanket for a water heater. I
think I paid $20 or $30 for it.
Jeff Howard
68 GT6
69 GT6
On Sat, 22 Nov 2003 13:23:52 -0800
Steve Myers <mountainunicycle@yahoo.com> wrote:
>I just installed a plastic transmission cover on my '72
>GT6. I was replacing the original fiberboard cover which
>indeed still had the fiberglass insulation stapled to it.
>I am quite sure the plastic cover by itself is louder
>than the fiberboard. However, I used that heat shield
>stuff--kinda like the under carpet stuff with a metallic
>foil on one side--with 3M interior spray adhesive, and it
>works great. I got the heat shield from spitbits for $30.
>I would avoid using the dynamat stuff since that's
>intended to noise created by panel vibration, not
>acoustic energy transmitted through the material itself.
>
>Steve
>72gt6
>71tr6
|